Jan 082014

Here is the original blog post over at Lumberjocks.com

Nightstand 4

After milling up the pieces and parts it was time to begin cutting to size and fitting up. The construction is all mortise and tenon and sliding panel. At this point the pieces are still marked with the position identifier and the orientation. I use kids sidewalk chalk to mark the pieces. Sidewalk chalk comes in different colors to mark light or dark wood, it’s dirt cheap, large sticks so it’s easy to find and handle, and it wipes off clean with a little elbow grease and a rag.

I had to tune up the panels to get them to fit snug but not too tight. A couple swipes with the shoulder plane and then run around them with a block plane to break the corners.

 Leave a Reply

To create code blocks or other preformatted text, indent by four spaces:

    This will be displayed in a monospaced font. The first four 
    spaces will be stripped off, but all other whitespace
    will be preserved.
    Markdown is turned off in code blocks:
     [This is not a link](http://example.com)

To create not a block, but an inline code span, use backticks:

Here is some inline `code`.

For more help see http://daringfireball.net/projects/markdown/syntax

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>