Jan 072014

Here is the original blog post over at Lumberjocks.com

Shoe Bench 8

Got the clamps off and now it’s time to clean up the glue joints and prep the surfaces for finish.

First thing to do was remove the clamps, flip the bench on it’s side, and plane all of the joints even.

After leveling the divider joints next came the ends. Bringing the half blind dovetails and through mortises level.

After the the ends and sides were level and smooth I ran around all of the corners, exterior and interior, with a hand held router and an eighth inch round over bit.

After that it was planing the seat smooth as glass.

 Leave a Reply

To create code blocks or other preformatted text, indent by four spaces:

    This will be displayed in a monospaced font. The first four 
    spaces will be stripped off, but all other whitespace
    will be preserved.
    Markdown is turned off in code blocks:
     [This is not a link](http://example.com)

To create not a block, but an inline code span, use backticks:

Here is some inline `code`.

For more help see http://daringfireball.net/projects/markdown/syntax

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>